
3.5dB link insertion loss
18 channels per fiber
Bi-directional
Can be used as multiplexer or de-multiplexer
Corephy 18CH low loss BIDI CWDM based on dielectric thin-film filter technology which designed for integration in low cost access and metro networks. It can multiplex up to 18 CWDM optical signal in a single optical fiber with only 3.5dB link insertion loss. It is package by 120*80*18mm ABS box with 900um loose tube, 2.0mm cable or 3.0mm cable, 1meter, all port with LC/UPC connector. The 18CH CWDM filter has high channel isolation and can be used in a bi-directional system. The module can be used as a multiplexer or de-multiplexer and uses a single slot in a frame or can be used, standalone, in an N-box.
Applications
Dark fiber networks
Broadcast contribution networks
Optical video networks
Event production
CWDM networks
Specification
Parameter |
Unit | 18CH CWDM | ||
| Mux | Demux | |||
| Channel Wavelength | nm | 1270~1610nm | ||
Center wavelength | nm | ±0.5 | ||
| Channel Spacing | nm | 20 | ||
Channel Passband | nm | >14 | ||
| Max Insertion Loss | dB | <5.5 or <3.5 with Skip | <5.5 or <3.5 with Skip | |
| Channel Ripple | dB | 0.3 | ||
Isolation | Adjacent | dB | >30 | |
| Non-adjacent | dB | >40 | ||
Inertion Loss Temperature | dB/℃ | <0.005 | ||
Wavelength Temperature | nm/ ℃ | <0.002 | ||
Polarization Dependent | dB | <0.1 | ||
Polarization Mode | dB | <0.1 | ||
| Directivity | dB | >50 | ||
| Return Loss | dB | >45 | ||
| Maximum Power Handling | mW | 300 | ||
| Opterating Temperature | ℃ | -5~+75 | ||
| Storage Temperature | ℃ | -40~85 | ||
| Package dimension | mm | L120x80x18 | ||
Note: 1. Customization is available.
2. Specified with connector
Ordering Information
| CWDM | Number of Channels | Configuration | Module type | Cable type | Fiber length | connector |
| CWDM | 01=1Channel 02=2 Channel 03=3 Channel 04=4 Channel ...... 16=16Channel 17=17Channel 18=18Channel | M=Mux D=Demux A=Mux+Demux | A1=ABS box 100x80x10mm A2=ABS box 120x80x18mm A3=ABS box 140x115x15mm L1=LGX 129*29*130mm L2=LGX insert in 2slot Rack L4=LGX insert in 4slot Rack R1=19" 1 U Rack R2=2slot 19″1U Rack R4=4slot 19″1U Rack X=Customized | 09=900um loose tube 20=2.0mm 30=3.0mm | 05=0.5m 10=1.0m 15=1.5m X=Customized | 00=none LP=LC/UPC LA=LC/APC SP=SC/UPC SA=SC/APC FP=FC/UPC FA=FC/APC X=Customized |





